Description
Please note THIS IS NOT A CLEAR CANOPY – it is a tool or ‘Buck’ to make a canopy.
This is made in two pieces to help fit on the average 3d printer. It should be glued together (keyed first) with Superglue Gel. Two .stl files are provided.
Designed to sit flat on a vacuum forming bed. Print with 5 Layer wall and zero infill.
Cut a large hole in the base.
Fill completely with plaster of paris. 60g of water to 100g Plaster. Most canopy tools take about 4-500g of plaster. Allow several days to dry – left with the belly up.
Once set, sand the 3d printed surface smooth starting with 80 grit, through to 400 grit – then using finer and finer grades of Wet n Dry paper.
Polish with a rubbing compound such as T-Cut, then buff with a cloth and water to get a polished finish.
Reviews
There are no reviews yet.