Description
TEST PILOT : Arif Isyanto
Prototype build : George Baxevanis
This model has been designed to take either :-
> Twin 50-64mm EDF
> Twin Pusher props
> Single pusher prop.
Can be made with or without 3d printed parts.
Includes specially created detailed decals for the iconic Top Gun F-14 flown by Goose and Maverick by www.combat-colours.com
Model Photos courtesy of George Baxevanis & Arif Isyanto
Tobias “Tigger” Gaus –
I have build the F14 as a F14A version with the wing gloves for the “Top Gun 2019 contest”
Build was straight forward but takes some carving, sanding and time 😉
I have build the Tomcat without the ailerons in the wings (I´m only flying the F-14 with the tailerons).
weight 1,6kg (without the cockpit and final painting)
EDF: 64mm FMS fans as 3s verision (3900 KV motors)
ESCs: 40A Turnigy Plush 32
Lipo: 3S5800mAh Akku
Attention: with the wing gloves there is no pitch down tendency (more a slight pitch up moment)
control throws tailerons: 30mm with 30% Expo on roll and pitch
video of the maiden
//www.youtube.com/watch?v=jmlQaWU3o3E&t=11s