Loading file
  • Fullscreen
  • Wireframe
  • Zoom In
  • Zoom Out
  • Rotation
  • Screenshot
  • Help

Controls

×
  • Rotate with the left mouse button.
  • Zoom with the scroll button.
  • Adjust camera position with the right mouse button.
  • Double-click to enter the fullscreen mode.
  • On mobile devices swipe to rotate.
  • On mobile devices pinch two fingers together or apart to adjust zoom.
  • On mobile devices 3 finger horizontal swipe performs panning.

Voodoo Single Canopy Vacuum forming tool .stl

$ 1.72

Categories: ,

Description

Please note THIS IS NOT A CLEAR CANOPY – it is a tool or ‘Buck’ to make a canopy.

This part is divided into two pieces to help you fit it on an average 200x200mm 3d printed bed.

Designed to sit flat on a vacuum forming bed.   Print with 5-8 Layer wall and zero infill.

Cut a large hole in the base up to the edge.

Fill completely with plaster of paris.  50g of water to 100g Plaster.   Most canopy tools take about 4-500g of plaster.  Allow several days to dry – rest on pencils, over a waterproof surface to allow the moisture to escape.

Once set, sand the 3d printed surface smooth using finer and finer grades of Abranet, then Wet n Dry paper.  Starting from 80 grit to 800 grit.

Polish with a rubbing compound such as T-Cut, then buff with a cloth and water to get a polished finish.

Reviews

There are no reviews yet.

Be the first to review “Voodoo Single Canopy Vacuum forming tool .stl”

Your email address will not be published. Required fields are marked *