Sepecat Jaguar plans

2 reviews for Sepecat Jaguar plans

1. 

   Rated 5 out of 5

   Rod Nordsvan – 21st November 2016

   After a little trial and error I have the Jaguar flying nicely, although I did discover it does not like inverted flight for any sustained period.My final set up is as follows:CG is 205mm forward of the trailing edge of the wing at the root. This is close to the leading edge of the wing but trust me this position gave the most stable flight with no wing rock.Throws for the ailerons are up & down 7mm, the elevators up & down 10mm (at the root).My motor is a: Turnigy L2210-1650 Bell Style Motor (250w), Hobbyking 50A ESC, Hobbyking 939MG servos & a 7 x 6 prop. Battery 2200mah 3S 35C.Mine is coming in at 810g painted and with 3D printed fuel tanks.It does not float like the F-15 on landing and tends to drop on the ground when speed is still a little high, nothing nasty though and quite predictable.WINNER!!!!!

2. 

   Rated 5 out of 5

   barry – 16th February 2023

   Fantastic little park flyer

   seen a few builds and thought lets do it.
   Pusher version Build
   AUW 555g ahahaha amazingly light without battery including pain and crazy little pilot 🙂
   3 or 4s 2200mAh battery around 200g took it to an amazing 700g
   powered by
   Emax 2205rs 2600kV Quad motor
   40 amp TGY ESC
   3x TowerPro MG90D servos
   6×4 pusher prop 5×5 would be suitable
   Ailerons 14mm +/- Max WAAAYYY too much haha proved to have huge effect when hand launching
   Elevator 22mm +/- Max again not necessary
   this was my High Rates set up and toned down during flight
   CG is pretty much on the money
   Great fun Flyer and slow flyer however be careful if power is off 😉
   plenty vertical fun and still to try inverted haha

   Buy it, Build it, Fly it, Love it and fly some more

   awesome