Loading file
  • Fullscreen
  • Wireframe
  • Zoom In
  • Zoom Out
  • Rotation
  • Screenshot
  • Help

Controls

×
  • Rotate with the left mouse button.
  • Zoom with the scroll button.
  • Adjust camera position with the right mouse button.
  • Double-click to enter the fullscreen mode.
  • On mobile devices swipe to rotate.
  • On mobile devices pinch two fingers together or apart to adjust zoom.
  • On mobile devices 3 finger horizontal swipe performs panning.

Buccaneer Canopy Vacuum forming tool .stl

$ 1.72

Categories: ,

Description

Please note THIS IS NOT A CLEAR CANOPY – it is a tool or ‘Buck’ to make a canopy.

This part is divided into two pieces to help you fit it on an average 200x200mm 3d printed bed.

Designed to sit flat on a vacuum forming bed.   Print with 3 Layer wall and 4% infill.

Cut a large hole in the base, and remove the infill matrix.

Fill completely with plaster of paris.  60g of water to 100g Plaster.   Most canopy tools take about 4-500g of plaster.  Allow several days to dry – left with the belly up.

Once set, sand the 3d printed surface smooth using finer and finer grades of Wet n Dry paper – use Automotive filler primer aerosol to help get a good surface.

Polish with a rubbing compound such as T-Cut, then buff with a cloth and water to get a polished finish.

Reviews

There are no reviews yet.

Be the first to review “Buccaneer Canopy Vacuum forming tool .stl”

Your email address will not be published. Required fields are marked *